Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Venice, CA
Garage door installation in Venice means dealing with narrow, low-clearance openings on detached alley-served garages built between the 1920s and 1950s. The salt air off the Pacific corrodes steel parts faster than almost anywhere else in Los Angeles, and stock doors rarely drop into these older openings without modification. We handle the full installation, from measuring a salt-rusted frame to hanging a new door that actually fits. Call (855) 341-7810 for a free estimate on your Venice garage.
Why Venice Homes Are Different
Venice is built on tight lots with garages that often sit at the back of the property, reached by narrow alleys off streets like Electric Avenue or Rialto Avenue. These structures were mostly built as small carriage houses or simple one-car shelters, and their openings reflect that era: low headroom, narrow widths, and rough framing that has settled over decades. We regularly see openings under 7 feet tall in 90291, which rules out most off-the-shelf doors. The marine air does the rest. Salt-laden fog rolls in off the Pacific and settles on tracks, torsion springs, rollers, and hinges. Steel rusts where it would stay clean a few miles inland in Culver City. Wind-driven sand near the boardwalk works its way into track channels and gums up rollers. And because Venice never really freezes, doors get cycled year-round. There is no winter off-season where a failing spring quietly waits. The defining Venice job is a small, salt-corroded garage on an alley lot in 90291 or 90294, where a standard door and stock torsion springs will not drop in without real modification, and where the ocean air has already done years of damage by the time anyone calls us.
Styles & brands we work with
Our Main Venice Services
Most Venice homeowners reach out to us for two things: a garage door that will not open, or an opener that has stopped responding. Both are covered in detail on their own pages, linked below.
Garage Door Repair in Venice
Salt corrosion attacks springs, cables, and rollers faster in Venice than nearly anywhere else in the region. A rusted torsion spring under load can snap without much warning, and when it does, the door becomes a dead weight. On Venice’s older detached garages, we also see track misalignment from settled framing and rollers that have frozen solid from sand and rust. Our team works on the full door system: Clopay and Amarr panels, Wayne Dalton hardware, and every major brand in between. Read the full breakdown at Garage Door Repair in Venice.
Garage Door Opener Repair in Venice
Opener failures in Venice often trace back to the same coastal conditions. Salt air corrodes circuit boards and limit switch contacts; sand works into the drive rail and grind gears. We repair openers from LiftMaster, Chamberlain, Genie, and Craftsman, and we diagnose the actual failure rather than defaulting to a replacement. If the logic board is eaten by salt, we say so. If it is a bad sensor, we replace the sensor. Details are at Garage Door Opener Repair in Venice.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Venice
Garage door installation in Venice is rarely a simple remove-and-replace job. The housing stock dates mostly to the 1920s through 1950s, and many garages are detached structures off walk streets and alleys with openings that are too low or too narrow for a stock door. Salt corrosion has often compromised the existing frame, and the track mounting points may need reinforcement before a new door goes up. We sell and install doors that fit the opening you actually have, not the opening a manufacturer assumes you have. Our installation work is covered in detail on our Garage Door Installation page.
Garage Door Replacement
Signs you need it
Your door has rust-through on multiple panels, the bottom section is soft from flood or ocean air, or the door is so far out of square that it binds against the opening on every cycle.
What it costs in Venice
A full replacement in Venice typically runs from $700 to $2,200 depending on the size of the opening and the panel material.
How we do it
We measure the actual opening, account for any framing settlement, remove the old door and hardware, then hang the new door on re-shimmed, re-anchored track with new weather seal.
Garage Door Installation Service
Signs you need it
You are converting a carport to a garage, building out a home studio or office above the garage, or replacing a door that was installed incorrectly by a previous contractor.
What it costs in Venice
New door installation on an existing opening starts around $700 and runs up to $2,200 for larger or custom-sized doors in Venice.
How we do it
We survey the opening first, confirm track configuration and spring sizing, install the door and hardware in one visit, then balance and cycle-test it until it runs true.
Garage Door Seal Installation
Signs you need it
You see daylight under the door, feel a draft near the bottom edge, or find sand and debris blown inside the garage every week.
What it costs in Venice
Seal installation is part of a full door installation; the overall new door range in Venice is $700 – $2,200, and a seal replacement alone falls under our general repair pricing of $150 – $600.
How we do it
We remove the old vinyl or rubber seal, clear the retainer track of sand and rust, and install a new bottom seal sized to the door’s actual length and offset.
What Garage Door Installation Costs in Venice
| Item | Typical range in Venice |
|---|---|
| New door installation | $700 – $2,200 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
What pushes Venice pricing toward the top of these ranges is almost always the opening itself. A standard 7-foot door is common inland, but many Venice garages have 6-foot-6 or 6-foot-8 openings that require a custom-cut door. Rusted track mounts needing replacement add labor. The quoted price is agreed before any work begins, and it does not change once we start.
Do I need a permit to replace my garage door in Venice?
For a straightforward door swap on an existing opening, no permit is typically required in Venice. If we are modifying the opening itself, framing, or adding electrical for a new opener, the city may require a permit. We will tell you during the measure if a permit is needed.
Can you install a garage door in a detached Venice alley garage?
Yes. Detached alley garages off walk streets and side alleys are the majority of our Venice installation work. Bring tight clearance, eroded framing, and rusted mounting hardware: we handle all three and size the door to the opening we find.
Brands We Service in Venice
Garage doors are all we do, and we work on whatever is already bolted to your Venice garage. That means Clopay or Amarr panels, Chamberlain and Genie openers, and hardware from every major manufacturer. We diagnose what is actually broken rather than steering toward any preferred brand. Our full brand coverage is at our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Venice, CA
| Service | Typical range in Venice |
|---|---|
| Garage door repair | $150 – $600 |
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
Salt damage is the biggest price variable in Venice. A spring that has been rusting for five years can snap and take a cable with it, which moves a $180 spring repair into a $340 spring-and-cable job. Sand in the tracks can turn a simple roller replacement into a track realignment as well. Regardless of what we find, the price is quoted and agreed before any work starts. You will never see a larger invoice at the end of the job than the number you approved at the beginning.
Neighborhoods We Serve in Venice
We cover all of Venice, from the walk streets west of Abbot Kinney to the canal district and the bungalow blocks east of Lincoln Boulevard. Our work takes us into the alleys off Electric, Crescent, and the smaller side streets where detached garages hide behind houses. Response time across Venice is typically same-day or next-morning, depending on the day’s schedule.
- West of Abbot Kinney
- Oakwood
- Venice Coast / Boardwalk
- Presidents Row
- East of Lincoln
Service Area – Cities Near Venice
Santa Ana Garage Door Service covers Venice and the neighboring communities. We also serve Santa Monica, CA to the north, Culver City, CA to the east, Ladera Heights, CA further inland, and Century City, CA to the northeast. For garage door work in Venice, call (855) 341-7810.
Serving Venice, CA — Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Venice
Garage door calls in Venice are generally handled same-day or next-morning. A snapped spring on a detached alley garage is a common call we make time for even when the schedule is full. Call (855) 341-7810 and we will give you a straight answer on timing.
For most repairs and direct replacements in Venice, no permit is required, and we handle everything. If the work involves structural changes or new electrical, we will flag it before the job, and we can guide you through the city process. You will know before any work starts.
Yes. We cover both Venice ZIP codes, 90291 and 90294, including beach blocks, the canal district, Oakwood, and the alleys behind Presidents Row. Those alley garages are exactly the kind of work we do most often.
If your Venice garage door needs repair, opener work, or a full installation, call (855) 341-7810 for a free estimate. We will tell you what is wrong, what it costs, and fix it right the first time.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Venice Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
— Lucia Guzman"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Wade Fletcher"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Christine Nguyen