Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Burbank, CA
Garage door installation in Burbank starts at $700 for a basic steel door and runs up to $2,200 for insulated, reinforced models suited to the valley heat. Most Burbank homes were built between the 1920s and 1960s, which means our installation work almost always involves upgrading old tracks, replacing undersized springs, and working around narrow driveways and converted garages. Santa Ana Garage Door Service has served Burbank since 2011, and we know the housing stock here well enough to quote accurately before we ever show up. Call (855) 341-7810 for a free, written estimate.
Why Burbank Homes Are Different
Burbank’s garage doors live a harder life than most people realize. The summer heat in the San Fernando Valley routinely pushes attic and garage temperatures past 110 degrees, and that heat cycling is brutal on torsion springs. Springs rated for 10,000 cycles fail early when the steel is baked every afternoon and cooled every night. Homes in the flats around Magnolia Park and the Chandler Bike Path corridor tend to be 1920s and 1930s bungalows with single-car detached garages, many still running original wood sectional doors or early steel doors from the 1950s. Those original setups often use a single torsion spring that was undersized when installed and is now overloaded.
Up in the foothills near the Verdugo Mountains, the picture shifts slightly. Homes along the 91504 ZIP code get stronger Santa Ana wind exposure, which wears on cables and hinges and can warp older wood panels. We also see a lot of production-industry households throughout Burbank who have converted or half-converted their garages into workshops, editing bays, or gear storage. Those customers consistently prioritize quiet belt-drive openers and solid security over raw opening speed. When we spec an installation, we keep that in mind.
Styles & brands we work with
Our Main Burbank Services
Burbank homeowners call us most often for two things: the door itself has failed, or the opener has stopped responding. Here’s what each job looks like on the ground here.
Garage Door Repair in Burbank
Springs snap, cables fray, rollers wear out, and tracks slip out of alignment. In Burbank, spring failures show up most often during the first heat wave of summer, when a spring that has been fatiguing all year finally gives out. Older single-spring setups from the 1940s and 1950s are common in the flats, and when those fail we almost always recommend upgrading to a two-spring system that balances the load and lasts longer. Garage Door Repair in Burbank covers the full door system, including panels, tracks, cables, and hardware. Whatever brand is on your door, we already know it.
Garage Door Opener Repair in Burbank
Openers fail differently than doors. The motor may run but the door doesn’t move, the remote stops working, or the opener reverses right after touching the floor. Burbank’s production-industry households often run LiftMaster or Chamberlain belt-drive openers specifically because they are quiet enough to not interfere with a home studio or editing setup. When that belt drive starts acting up, speed matters. Garage Door Opener Repair in Burbank covers the drive system, from smart opener diagnostic checks to gear and sprocket replacement on Craftsman units. We fix what you have, not what a manufacturer rep wants to sell you.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Burbank
Garage door installation in Burbank starts at $700 for a single-car, non-insulated steel door and runs up to $2,200 for a double-car door with insulation and reinforced hardware. Most homes here are pre-1960s bungalows and small tract houses, and the original doors are frequently wood or early steel that has warped in the valley heat or cracked under Santa Ana wind stress. Doors from that era also tend to sit on narrow, sloped driveways, which means our team does precise leveling work before mounting new tracks. We handle the full job on site, and if you are leaning toward a complete door replacement rather than a repair, our Garage Door Installation service covers every step from measurement to final balance.
Garage Door Replacement
Signs you need it
Panels are cracked or bowed, the door sags visibly in the center when open, or every spring season brings a new repair to the same door.
What it costs in Burbank
New door installation runs $700 to $2,200 in Burbank, with panel replacement on an existing door running $250 to $500 per panel.
How we do it
We measure the opening, confirm track condition and spring sizing, remove and haul away the old door, then install the new door with fresh weatherseal and a balance test.
Garage Door Installation Service
Signs you need it
You are replacing a converted garage back into a functioning garage, or building out a half-converted space and need a weathertight, insulated door.
What it costs in Burbank
Full installation service in Burbank ranges from $700 to $2,200 depending on door size, insulation, and whether we need to retrofit the track system.
How we do it
We inspect the framing and floor, install new tracks and springs sized to the door weight, mount the panels, and finish with seal installation and safety sensor alignment.
Garage Door Seal Installation
Signs you need it
Daylight is visible under or around the door, or dust and leaves from the Verdugo foothills collect inside the garage between uses.
What it costs in Burbank
Seal installation is included in most new door installs we do in Burbank, and as a standalone job it falls within the $150 to $600 repair range.
How we do it
We pull the old bottom seal and side weatherstripping, clean the channels, and install compression-fit seals sized to the door profile and the gap at the floor.
What Garage Door Installation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| New door installation (single-car) | $700 – $1,400 |
| New door installation (double-car, insulated) | $1,400 – $2,200 |
| Opener installation (added to a new door) | $250 – $550 |
The price you are quoted is the price you pay. No surcharge shows up after the old door is off. In Burbank, the two cost drivers we see most are uneven garage floors that need shimming before the track can be mounted, and the need to bring older framing up to a clean mounting surface.
How long does garage door installation take in Burbank?
Most Burbank installations take three to five hours on site. Doors on narrow or sloped driveways, or replacements that require new track mounting, stretch toward the longer end. We schedule a firm window and finish the same day we start.
Do I need a permit to replace my garage door in Burbank?
Standard residential garage door replacement in Burbank does not require a city building permit when the opening and structure are unchanged. If your project includes widening the opening or structural framing changes, the city may require a permit. We can walk you through that determination for your specific property.
Brands We Service in Burbank
We are trained across eight major brands, and the ones we see most often in Burbank garages are Clopay, Amarr, Wayne Dalton, and Craftsman. Because we carry springs, rollers, hinges, and opener parts in our trucks for all of those lines, most repairs and installs get completed in one visit rather than waiting on a follow-up order. See our brands for the full list of what we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| Garage door repair (general) | $150 – $600 |
Two things push prices toward the higher end in Burbank more than anything else: doors on steep or narrow driveways that require extra leveling work, and pre-1960s framing that needs reinforcing before new hardware can be mounted. Every quote is discussed and agreed before we start, so there are no surprises when the work is done.
Neighborhoods We Serve in Burbank
We run calls all over Burbank, from the flats to the foothills. Our service area includes:
- Magnolia Park
- Rancho Adjacent
- Burbank Hills
- Verdugo Foothills
- Northwest District
Most Burbank repair calls are answered the same day. Installations are scheduled within a few days to allow time for proper measurement and door ordering.
Service Area – Cities Near Burbank
Burbank sits at the center of our northern Los Angeles service area. We take calls from Universal City, CA, just over the hill, and from North Hollywood, CA across the 134. To the east we serve Glendale, CA, and west of the studios you will find us in Studio City, CA. If you are anywhere in the surrounding valley, call us and we will tell you straight whether we can get to you.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Burbank
Yes. We cover all four Burbank ZIP codes: 91505, 91506, 91507, and 91508. Whether you are in the flats near Olive Avenue or up against the foothills, you are in our service area.
No. We quote after looking at the door, the track condition, and the driveway approach, and the number we give you is the number on the invoice. If we find something unexpected mid-job, we stop, show you, and get your sign-off before proceeding.
Yes. Our trucks are stocked with springs, cables, rollers, hinges, and opener components for Clopay, Amarr, Wayne Dalton, Craftsman, LiftMaster, and Chamberlain systems. Most repair calls in Burbank are finished on the first visit.
Call (855) 341-7810 for a free estimate on any garage door job in Burbank. We will give you a straight answer, a written price, and the work done right.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
— Marcy Hayes"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— Sana Mehta"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
— Priya Shah